首頁 / 產品介紹
產品介紹
MA-2100
MA-2100

DESCRIPTION
• Better performance than conventional lathes
• 3-step speeds, each in variable speed change
• Speed change by auto shifting
• More convenient turning processing control & spindle speed shown on rpm meter
• Braking controlled by quick inverter stop
• Through cross feeding at fixed spindle speed, you´ll get the fine accuracy & speed for slide face of round plate (similar to CSS function)
• Through cross feeding for step turning, the spindle speed change can match and achieve rapid effect

 

 

Description\MODEL

Unit

MA-2140(i)

MA-2160(i)

MA-2180(i)

MA-21120(i)

CAPACITY

 

 

Center height

mm

270

Swing over bed

mm

540

Swing over gap

mm

720 (opt.)

Swing over cross slide

mm

360

Distance between center

mm

1000

1500

2000

3000

Bed width

mm

350

SPINDLE

 

 

Spindle bore

mm

Ø85 (3”)

Ø105 (4”)opt.

Spindle nose

-

D1-8

A1-11

Spindle speeds 18 steps

rpm

25~1545

23~1293

Inverter type

(Variable speeds)

H: 491~2250

M: 126~490

L: 27~125

H:331~1500

M: 93~330

L: 20~92

TRAVEL

 

 

Gross slide travel

mm

330

Compound rest travel

mm

130

TAILSTOCK

 

 

Tailstock spindle dia.

mm

75

Tailstock spindle travel

mm

170

Tailstock spindle taper

-

MT#5

THREADS

 

 

Lead screw

-

4 TPI or 6 mm/pitch Ø35

Metric pitch threads

-

0.5 - 7 mm/pitch (24 kinds)

Inch pitch threads

-

4 - 56 TPI (36 kinds)

Module pitch threads

-

0.25 - 3.5 M (16 kinds)

DP threads

-

8 - 112 P (36 kinds)

FEEDING RANGE

 

 

Range of longitudinal feeds

mm/rev.

0.06 - 0.88

Range of cross feeds

mm/rev.

0.03 - 0.44

MOTOR

 

 

Main spindle motor

HP

10  /  15  (opt.)

Coolant pump motor

HP

1/8

WEIGHT

 

 

Net Weight Approx.

kg

2200

2450

2600

2700

Note:

We have the right to modify the specification or designs. If there are subjected to change without

prior notice.

MA-2100(i) Series

 

MA-2100(i) Series

ACCESSORIES

 

STANDARD ACCESSORIES

 

OPTIONAL ACCESSORIES

l           Main drive motor

l           CE conformity

l           Coolant equipment

l           Electromagnetic brakes

l           4-way tool post

l           Gap bed

l           Tail stock

l           Z-axis rapid travel

l           Center sleeve

l           Digital Readout System

l           Dead Center

l           3-Jaw scroll chuck

l           Tool box & tools

l           4-jaw independent chuck

l           Independent Electrical Box

l           Double chuck system

l           Operation & Service Manual

l           Rear chuck adaptor

 

l           Face plate

 

l           Quick change tool post

 

 

l           Taper attachment

 

 

l           Full length splash guard

 

 

l           Chuck guard

 

 

l           Chip and coolant shield

 

 

l           Leadscrew guard

 

 

l           Work light

 

 

l           Steady rest

 

 

l           Follow rest

 

 

l           Micro-meter bed stopper

 

 

l           Turret type 5-position bed stopper

 

 

l           Rotating center